Sony PDW-1500 Operation Manual page 36

a Type of time data
Display
CNT
TCR
UBR
TCR.
UBR.
TCG
UBG
IN
OUT
DUR
Note
If the time data or user's bits cannot be read correctly,
they will be displayed with an asterisk. For example,
"T*R", "U*R", "T*R." or "U*R.".
b Time code reader drop frame mark (for 525 line
mode only)
".": Indicates drop frame mode
":": Indicates non-drop-frame mode
c Time code generator drop frame mark (for 525 line
mode only)
".": Indicates drop frame mode (factory default setting)
":": Indicates non-drop-frame mode
d VITC field mark
" " (blank): Fields 1 and 3 (for 525/60 mode) or fields 1, 3,
5 and 7 (for 625/50 mode)
" * ": Fields 2 and 4 (for 525/60 mode) or fields 2, 4, 6 and
8 (for 625/50 mode)
e Menu setting states
Display Description
B1 The current menu settings are the same as
the settings in menu bank 1.
B2 The current menu settings are the same as
the settings in menu bank 2.
B3 The current menu settings are the same as
the settings in menu bank 3.
B4 The current menu settings are the same as
the settings in menu bank 4.
DF The current menu settings are the same as
the factory defaults.
No display The current menu settings are different from
all of the above.
1) This is supported from firmware version 1.4.
36
3-4 Superimposed Text Information
Meaning
Counter data
TC reader time code data
TC reader user bits data
VITC reader time code
VITC reader user bits data
TC generator time code
TC generator user bits data
IN point time data
OUT point time data
Duration between IN point and OUT
point
1)
f Operation mode
The field is divided into two blocks as shown below.
• Block A displays the operation mode.
• Block B displays the servo lock status or playback speed.
A
Display Operation mode
Block A Block B
DISC OUT Disc is not loaded.
LOADING Disc is being loaded.
UNLOADING Disc is being unloaded.
STANDBY OFF Standby off mode
STOP Stop mode
NEXT Cuing up to the first frame of the
next clip.
PREV Cuing up to the first frame of the
current clip.
F.FWD Fast forward search
F.REV Fast reverse search
PLAY Playback mode (servo unlocked)
PLAY LOCK Playback mode (servo locked)
REC Record mode (servo unlocked)
REC LOCK Record mode (servo locked)
JOG STILL A still picture in jog mode
JOG FWD Jog mode in forward direction
JOG REV Jog mode in reverse direction
SHUTTLE STILL A still picture in shuttle mode
SHUTTLE (Speed) Shuttle mode
VAR (Speed) Variable speed mode
TOP 0001/xxxx Cuing up to the first frame of the
first clip.
END xxxx/xxxx Cuing up to the last frame of the
last clip.
PREROLL Cuing up during thumbnail search
g Playback condition mark
One of three channel condition marks is displayed when
the ACCESS indicator is lit during any mode except
recording. The three channel condition marks indicate the
following three stages.
B