Sony PDW-1500 Operation Manual page 106

Item number Item name
713 VIDEO SETUP REFERENCE
Sub-item
1
2
715 VIDEO GAIN CONTROL
716 CHROMA GAIN CONTROL
717 CHROMA PHASE CONTROL
718 SETUP LEVEL (525(U)/525(J) line
modes)/BLACK LEVEL (625 line
mode)
719 SYSTEM PHASE SYNC
720 SYSTEM PHASE SC
723 INPUT VIDEO BLANK
Sub-item
1
2 ... 10 LINE 12 ...
2 ... 15 LINE 9, 322 ...
726 H BLANKING WIDTH
728 OUTPUT SCH PHASE
106
8-3 Extended Menu
Menu items in the 700s, relating to video control
Settings
Select whether to remove the setup (7.5%) from the input analog video
signals and whether to add the setup (7.5%) to the output analog video
signals (when 525(U) or 525(J) line mode is selected).
INPUT LEVEL Whether to remove the setup (7.5%) from the input analog video signals.
0.0%: Do not remove.
7.5%: Remove.
The factory default settings for each line mode are as follows:
525(U) line mode: 7.5%
525(J) line mode: 0.0%
OUTPUT LEVEL Whether to add the setup (7.5%) to the output analog video signals.
0.0%: Do not add.
7.5%: Add.
The factory default settings for each line mode are as follows:
525(U) line mode: 7.5%
525(J) line mode: 0.0%
Adjust the video output level.
–512 to 0 to 511
Adjust the chroma output level.
–512 to 0 to 511
Adjust the chroma phase.
–128 to 0 to 127
Adjust the setup level (black level).
–512 to 0 to 511
Adjust the output signal sync phase.
–128 to 0 to 127
Adjust the output signal subcarrier phase.
0 to 511
Switch blanking on or off for individual lines in the vertical blanking
interval of an input video signal. The Y/C signal and odd/even fields are
blanked simultaneously.
A signal with blanking carried out according to this setting is recorded.
ALL LINE - - -: Specify the blanking for each line separately.
blnk (blank): Regardless of the setting of other sub-items, blank all lines
thru (throu): Regardless of the setting of other sub-items, switch off
In 525(U)/ Specify blanking for lines 12 to 20.
LINE 20 525(J) blnk (blank): Carry out blanking.
line thru (throu): Switch off blanking.
modes
In 625 line Specify blanking for lines 9, 322 to 22, 335.
LINE 22, 335 mode blnk (blank): Carry out blanking.
thru (throu): Switch off blanking.
Select the horizontal blanking width of the output analog video signal.
narow (narrow): Digital blanking (narrow)
wide: Analog blanking (wide)
When "wide" is selected, the horizontal blanking width complies with
RS170A, and normally the blanking is widened and the image becomes
narrower. It is recommended to select "narow" at the editing stage, then
later, for broadcast transmission to select "wide," to output a signal
conforming to the standard. Note, however, that "narow" has to be always
selected for SDI signals.
Set the subcarrier H phase.
–512 (–512 (DEC))... 0 (0 (DEC))... 511 (511 (DEC))
which can be specified in this menu item.
blanking for all lines which can be specified in this menu item.