Sony PDW-1500 Operation Manual page 127

Message in time Display
data display
condition
TC EXT! on
REGEN mode! on
REC-PAUSE! on
REC mode! on, limit
REC mode! on, limit, off
REC mode! on, limit
REC mode! on, limit, off
No SEL List on, limit
No SUB Clip on, limit
SB CLP mode on, limit
SUB CLIP NG on, limit
No List! on, limit, off
STOP ONCE! on, limit
STOP ONCE! on, limit, off
No EM Space on, limit, off
EM Full! on, limit, off
Formatting! on, limit, off
Disc Damage on, limit, off
Description
a)
A time code or user bits preset operation
was attempted with extended menu item
626 "TC MODE" set to "ext preset."
A time code or user bits preset operation
was attempted with extended menu item
626 "TC MODE" set to "int regen," "ext
regen," or "rp188 regen."
A time code or user bits preset operation
was attempted with recording paused.
An attempt was made to switch video or
audio signals during recording.
An attempt was made to display the
system menu "DISC MENU" during
recording.
The THUMBNAIL button was pressed
during recording.
An attempt was made to display DRIVE
MAINTENANCE in the maintenance
menu during recording.
The SUBCLIP button was pressed
without loading a clip list from the disc
into the current clip list.
A button in the playback control section
was pressed when there were no sub
clips in the current clip list.
The SHIFT button and the THUMBNAIL
button were pressed together with the
SUBCLIP button lit.
The SHIFT and SET buttons were
pressed together when IN and OUT
points were not set correctly (the OUT
point was set before the IN point, etc.).
An attempt was made to delete a clip list
with no clip lists saved on the disc.
The SUBCLIP button was pressed
during playback of a clip list.
An attempt was made to display the
CLIP menu during playback.
Recording of an essence mark failed
because the number of essence marks
recorded on the disc reached the upper
limit of the specifications of this unit.
An attempt was made to add an essence
mark with the number of recorded
essence marks at the upper limit of the
specifications of this unit.
An attempt was made to display the
DISC MENU page in the system menu
during an auto format.
An attempt was made to record, display
an E-E picture, record an essence mark,
or add a quick scene selection sub clip
when there was no free sparing area.
Action
Try the operation again after setting
extended menu item 626 "TC MODE" to
"int preset."
See 8-3-2 "Extended Menu Operations"
(page 109) about how to make this setting.
Try the operation again after stopping
recording.
Try the operation again after loading a clip
list.
For details, see 5-3-1 "Loading a Clip List
From Disc Into Unit Memory" (page 66).
Playback is not possible without a sub clip
in the current clip list.
Press the SUBCLIP button, turning it off,
and try the operation again.
Set the IN and OUT points correctly and try
the operation again.
This operation is not possible.
Try the operation again after stopping
playback.
Use the PDZ-1 Proxy Browsing Software to
delete unneeded essence marks.
Wait until the end of the auto format.
This disc cannot be recorded. Exchange
the disc.
127
9-3 Alarms