Sony PDW-1500 Operation Manual page 25

Connecting three PDW-1500 units to a laptop computer via a LAN.
Laptop computer
To network connector
Using the S400 (i.LINK) connector (FAM connection)
The following shows an example of a FAM (file access
mode) connection.
Note
The PDZ-1 Proxy Browsing Software must be installed in
advance.
The required FAM driver is also installed when you install
the PDZ-1 software.
1: Network cable (not supplied)
1
LAN
Make sure the remote control switch (see page 13) is set to
"NETWORK" on each of the three PDW-1500 units and extended
menu item 257 "NETWORK ENABLE" is set to "net."
See 5-4 "Using PDZ-1 Proxy Browsing Software" (page
69) for more information about installing the PDZ-1
software.
Some limitations apply to FAM connections. For details,
see 7-2 "File Access Mode File Operations" (page 79).
(network) connector
PDW-1500
1
(network) connector
PDW-1500
1
(network) connector
PDW-1500
1
3-1 Connections and Settings
25