6 Operating your TV DVD AND DVB-T
TV BUTTON OPERATION
6-1 Power/Stand-By ON/OFF
STANDBY
Note: This does not apply in DVD or AV mode.
6-2 Program Up/Down
6-3 Direct Access Tuning(remote control)
6-4 Single/ Dual/ Triple digits Program number selection. -/-- (Remote control)
Single/ Dual/ Triple digit Program number selection. -/-- (Remote control). To select a
programmer number above (9), press the -/-- once, then the two digit number, i.e. -/--
then 2, then 3 = Programmer 23. You may also select three digit numbers by pressing
the -/-- button twice. I.e. -/--, -/-- then 2, then 3, then 4 = Programmer 234.
maximum number of programmers is 249
6-5
Volume Control
6-6
TV/ AV /DVB/DVD Selection
TV/AV
This allows you to select TV, AV1 DVB-T/AV2 and
DVD modes, when you press on the front panel the
TV/AV/DVD button. if you press on the remote control
DVD will not display.
With the Power button on, you may turn the set on and off with the Remote
control. In the "Standby" mode you may also use the P+/P- buttons on the
Remote control and the TV set. This TV has an automatic switch off, if no
signal is received for 10 minutes.
Push remote or front panel [P+] key,
,to change Program Up
Push remote or front panel [P-] key,
to change Program Down.
Direct Program Access. Using the numeric buttons
on the Remote Control, programmers may be directly.
selected
Push the remote control or front panel [V+] key, for Volume Up
Push the remote control or front pane [V-] key, for Volume Down
8
1
1
DVD
DVB-T/AV2
AV1
3
The