LCD Screen Although the LCD screen is made with high-precision technology and 99.99% or more of the pixels are effective, black dots may appear or bright points of light (red, blue or green) may appear constantly on the LCD screen. This is not a malfunction.
Caution Safety Information Unit andAccessory Getting Started Front View Rear View Remote Control Key Functions Menu Operation 9-10 Basic TV operation PICTURE menu options SOUND menu options TIMER menu options FUNCTION menu options 14-15 SETUP menu options 16-17 DVD operation 17-19 DVD System Operation Disc care...
caution Caution The lightening flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Safety Information Safety Information To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. Electrical safety The TV set should only be connected to a mains supply which matches that stated on the label on the mains adaptor To prevent overload, don't share the same mains supply socket with too many other items of equipment.
Page 6
Unit and Accessory Power cable Warranty Card Quick Start Guide User’s Manual Warranty Card Quick Start Guide...
Getting Started Getting Started Buttons For TV operation Please insert a 12cm disc according to the Label LED Indicator Buttons for DVD operation Power(on/standby) Remote Control Window (keep clear) (IR) Infrared Receiver: Receives IR signals from the remote control. (Power on/Standby) LED Indicator: Press POWER to turn on and off, Indicator on(Blue) Standby mode below...
Getting Started Power switch Common Interface COAX Output to Audio amplifier TV Signal...
Page 9
Getting Started REAR CONNECTIONS Name Function Description Connect to power supply AC POWER IN Connect to the HDMI of your DVD or other equipment HDMI VGA signal from computer output VGA IN Connect to the composite terminal of your DVD/VCR SCART S-Video signal input S-Video IN...
Remote Control Key Functions POWER OFF Switch off the power supply. POWER FUNCTION STANDBY FUNCTION Press to display the input source menu .(see page 10) STANDBY Turn the TV on/standby. TEXT Colour buttons: short cuts-follow the coloured links in SUBTITLES HOLD the text.
Page 11
POWER FUNCTION STANDBY TEXT 0-9,-/-- Choose channel directly. Number buttons for DVD. PICTURE: Select the picture mode. HOLD SUBTITLES SOUND: Select the sound mode. Timer Standby timer. PROG MENU EXIT ASPECT Press to change the display mode of the screen. QUICK START MUTE DISPLAY...
Menu Operation Basic TV operation TURN ON LCD TV 1.Connect power cable to mains supply and turn on the power by using the “ Toggle Switch” at the back of the TV on the right hand side. The standby indicator on the front of the tv will light up in Blue. 2.Use the POWER button on the front of the TV or the STANDBY button on the handset to turn on the TV , the blue light will extinguish.
Page 13
Press the MENU button to display the main menu. buttons to select menu, and press button to enter the menu. PICTURE SETUP SOUND Personal Picture Mode Volume Country Contrast Sound Mode Personal Auto tuning Brightness Bass Manual tuning Color Treble Program Edit Tint Balance...
In this manual, the OSD (On Screen Display) may be different from your TV's because it is just example to help the TV operation. PICTURE menu options Press the MENU button on the front panel the remote control and then use button to select the Video menu, press button to enter(see the picture below).
SOUND menu options Press the MENU button on the front panel or on the remote control and then use button to select the Sound menu, press button to enter(see the picture below). SOUND 1. Use button to select what you want to adjust in the Video menu.
FUNCTION menu options Press the MENU button on the front panel or on the remote control and then use button to select the Function menu, press button to enter(see the picture below). FUNCTION 1. Use / button to select what you want to Language English adjust in the Video menu.
Page 17
SETUP menu options (used in TV/DTV source) Press the MENU button on the front panel or on the remote control and then use button to select the Setup menu, press button to enter(see the picture below). SETUP 1. Use / (CH+/-) button to select what you want to Country adjust in the Video menu.
Page 18
Manual Tuning in DTV mode Manual Tuning Channel Start Search Begin Service Found Signal Quality Signal Strength Frequency 474.00MHz Select Adjust Channel: Select the current channel. Start Search: press button to begin searching, and it will display “Search”, after a few second, it will display “Finish”.
DVD Operation DVD Operation Press the Power button on the TV or the remote control, then press the FUNCTION button to select DVD mode. If there is no disc in the DVD player the screen will show "NO DISC". Place a disc Insert a disc according to the silk.
DVD System Operation Zoom In the Video Image 1. Compatible with DVD, SVCD, VCD, JPEG discs. 2. The Zoom Function allows you to enlarge the video image. 3. Press Zoom repeatedly to activate the function and choose the required zoom factor: Zoom 1, Zoom 2, Zoom 3, Zoom 4, Zoom 1 /2, Zoom 1 /3, Zoom 1/4, Zoom Off.
DVD System Operation TV SYSTEM According to the Color system of your TV, select proper TV TYPE. PASSWORD The password option is initialized as locked. You cannot set the ratings limit or change the password. To enable these features you must unlock the Password. The default password is "0000". Using the button, move the highlight to "PASSWORD", press the button and enter "0000".
Page 22
DVD System Operation 4. DIGITAL SETUP The video setup options are illustrated below: - DYNAMIC RANGE: Use the / button to move the scroll and adjust the dynamic range. - DUAL MONO: Choose the mode of the audio output. - There are four modes: STEREO, MONO L, MONO R, MIX MONO.
Disc Care Disc Care About Disc Terms Title Generally, pictures or music compressed on a DVD are divided into several sections, "title". Chapter The smaller section unit of picture or music in a DVD under the title, usually one title is comprised of one or more chapters and each of them is numbered for easy searching, but some discs may not have a recording chapter.
Simple Troubleshooting Simple Troubleshooting SYMPTOM REMEDY GENERAL Dead. No LED Lit No power to the TV. Check all connections to the TV including. Press either the Power button or the Standby Dead Led lit red Set still in standby. button on the Remote control. No signal.
Techincal Specifications Techincal Specifications TVSystem PAL/SECAM, BG/DK/I Screen size 22"(diagonal) Resolution 1680x1050pixels (RGB) Aerial input (unbalanced) Audio output power 2x3 W Power Consumption AC 100-240V 50/60Hz 60W Remote control Type infrared Control distance Control angle 30° (horizontal) Batteries 2 x 1.5 V, size AA Dimensions 48 x 168 x24 mm Weight...
Order Form To get your bracket fast go to www.Solutions4Today.co.uk Or fill in the form below and post to: Solutions 4 Today, PO Box 56, Leyburn, DL8 4WU Or call 02921 25 00 11 Unit Price with Unit Price with Unit Price with Unit Price with Unit Price...
Page 28
LCD WALL MOUNTS TO FIT YOUR TELEVISION. £10 off up to £10 off up to £10 off up to £10 off up to To make the most of this great deal go to 30 days after 30 days after 30 days after 30 days after www.Solutions4Today.co.uk purchase...