Table of Contents
Advertisement
8 DVD BASIC OPERATIONS
8-1 Preparations
Press the TV/AV/DVD button on the front panel or TV/DVD on the remote control to enter the DVD
status. Press the TV/AV/DVD button on the front panel or TV/DVD on the remote control again to
return to the TV mode.
Note: The unit did not allow enter DVD mode again after it have just left to avoid any damage of the DVD.
Wait for 10 second to enter again
8-2 OPEN AND CLOSE
1. Press OPEN/CLOSE to open the disc tray on the remote control or on the front panel, place a disc on
the disc tray. There are two different disc sizes. Place the disc in the correct guide on the disc tray. If
the disc is out of the guide, it may damage the disc and cause the DVD player to malfunction. Do not
place a disc, which is unplayable in this DVD player.
2. Press OPEN/CLOSE to close the disc tray, the playback will automatically start. Some disc may not
playback automatically, you can press ENTER/PLAY button to start playback.
3. Some disc may start playback with a menu, use the cursor button on the remote control to select menu
options and press ENTER/PLAY to start, or press digits to select a menu options directly.
8-3 PAUSE/ STEP
PAUSE PLAYBACK
1. Press PAUSE/STEP to pause playback (still mode). The sound will be muted during still mode.
2. Press ENTER/PLAY to resume normal playback.
SINGLE STEP PLAYBACK
1. Press the PAUSE/STEP button to pause the playback.
2. To view the next frame, press the PAUSE/STEP button. Each press of the PAUSE/STEP button
advances the film by one frame.
8-4 STOP PLAYBACK
1. Press STOP
some disc the player can recall the location where stopped, such as DVDS and audio CDs.
2. Press ENTER/PLAY to resume playback from the location where playback is stopped.
3. Press STOP twice to stop completely.
8-5 PREVIOUS AND NEXT
During playback, press PREV
press of this key will skip a chapter till the start of the disc.
Note: Disc function may vary depending on disc format.
Each press of NEXT
8-6 FAST FORWARD AND FAST REVERSE
1. Press F.FWD
the fast forward motion speed changes. It would cycle through 2X, 4X, 8X, 16X, 32X and normal.
2. Press ENTER/PLAY to resume normal playback.
3. Press F.REV
the fast reverse motion speed changes. It would cycle through 2X, 4X, 8X, 16X, 32X and normal.
4. Press ENTER/PLAY to resume normal playback.
button to go to stop mode, the TV screen will show the start-up logo. For
key can go back to the beginning of this chapter, then each
key during playback will skip the current chapter and play the next one.
to fast forward through the disc. Each time the F.FWD
to fast reverse through the disc. Each time the F.REV
13
button is pressed,
button is pressed,
Advertisement
Table of Contents
