Table of Contents
Advertisement
TV BUTTON OPERATION(CONTINUED)
6-7 MUTE
On the TV AV DVB and DVD mode, you press the MUTE
MUTE
button on the remote control to turn off the sound, and if you
press MUTE again to turn on the sound back on
NOTE: The factory default is non-mute before switching on the unit.
6-8 RECALL
RECALL
You press the RECALL button, on the TV screen TV sound system and program
number OSD would displayed.
6-9 P.P (PICTURE EFFECT)
P.P
You can quickly select the desired picture mode from three factory preset modes and
one customized mode.
By repeatedly pushing this key, picture effects will change as follows.
6-10 SLEEP
(Sleep Timer)
SLEEP
Press the SLEEP button to set the required time.The
Count down will start immediately.
Note: To check timer left, press the sleep button once. To
cancel the sleep timer, press the SLEEP button to set the timer
to 0.
SWAP
Swap function enables quick swap to the last watched program.
1 suppose the channel number you used just is 8 and the channel
number you are using is 18 (as shown in the figure).
2 If you want to return to the last watched program channel 8,you
can simply press the SWAP button;
3 If you want to return to channel 18, press the button again.
Through this function, you can easily change between the
channel you are using and the channel you used last time.
STANDARD
DYNAMIC
PP
MILD
9
STANDARD
0
15
30
225
240
18
8
18
Advertisement
Table of Contents
