Table of Contents
Advertisement
Full Scan
The "Full Scan" option allows you to modify
the parameters that will be used when tuning
your receiver.
Follow the directions provided in the Automatic
Scan section to arrive at the "Service Setup" menu
( you will have to re-enter the PIN exactly as
indicated in the Automatic Scan section).
Select " Full Scan Setup " and press [ OK ].
The following settings may be adjusted:
Transmission Mode – options to select 2K and 8K.
Guard Interval – options to include guard intervals of
1/4, 1/8, 1/16 and 1/32.
Select your choice of transmission modes and
guard intervals by using the navigation buttons.
Press [ Exit ] to save changes and exit this menu.
Note :
If after changing various tuning parameters you find you can no longer tune TV channels, you can revert
to the ex-factory condition. In this condition no TV channels are tuned and you must start from the very
beginning to reset to the ex-factory condition. In order to reset the ex-factory state: select the main
menu and press 0000
Note
The default settings are set for the UK DTT network, which are 'Yes' for 2K transmission mode and 1/32
guard interval.
30
Advertisement
Table of Contents
