Table of Contents
Advertisement
iCanView220/220W User's Guide
3. Connecting iCanView220/220W to Network
iCanView220/220W supports LAN, xDSL, and Cable modem. It also supports shared IP
environment where single IP address is shared by at least 2 IP devices. Refer to
[IP-Installer
User's Guide]
for details of setting the IP address for iCanView220/220W.
3.1. Connecting to LAN
In case of connecting the iCanView220/220W to LAN, it is generally connected as in Figure 3-1.
Figure 3-1. Connecting the iCanView220/220W to LAN
1. Follow through steps 1 to 4 in Section 2.5 to assign IP address to iCanView220/220W.
2. Install iCanView220/220W and connect it to desired LAN.
3. Check if you can receive video data when connecting to iCanView220/220W using the viewer
program.
4. When one or more IP video products are connected through a IP sharing device (i.e. router) to a
larger network (i.e. the internet), in order to access each unit from outside the local area network,
each device must have a unique RTSP (Real Time Stream Protocol) and HTTP port number. You
must also configure your IP sharing device for port forwarding, so that each port, when accessed
Rev.1.0 (Aug. 2006)
Advertisement
Table of Contents
