Manual Configuration; Uad Settings - Polycom User Manual

4 Polycom Phones User Guide
4.1

Manual Configuration

This chapter describes how to set UAD settings, create PBXware extension and register
the phone.
The following topics are covered:
-

UAD Settings

- Creating Extension
- Registering Phone
4.1.1 UAD Settings
1. Login to PBXware web administration interface
Open a new browser window and enter the IP address in order to access the
PBXware web administration login screen. Example: http://192.168.1.10
Login to PBXware with your e-mail address and password.
2. UAD settings
Navigate to Settings:UAD.
Make sure Polycom UAD is enabled. To check the UAD status click on the edit
icon corresponding to your Polycom phone.
Make sure Status is set to Active, Auto provisioning is set to No, and DHCP
is set to Yes.
© 2003 - 2012 Bicom Systems