Tftp; Http & Https - Polycom User Manual

Scroll to Server Menu and press Select button.
You can use TFTP or HTTP & HTTPS protocols in order to Auto Provision your
Polycom phone.
Choose which protocol you want to use:
-

TFTP

- HTTP & HTTPS
4.2.3.2.1 TFTP
Press Edit button to edit Server Type, change to Trivial FTP and press Ok
button.
Scroll to Server address and press Edit button, then enter tftp:// followed by
Hostname or IP Address, followed then by /$MA.cfg.
- Example for Hostname: tftp://voip.bicomsystems.com/$MA.cfg
- Example for IP Address: tftp://192.168.1.10/$MA.cfg
Press Back button twice, then press Select button to Save Configuration.
Auto provisioning process will start during phone reboot process, phone will pickup
appropriate configuration file from PBXware. If everything is done as above
described, you should have successfully registered your phone to PBXware. Dial
*123 to verify registration.
4.2.3.2.2 HTTP & HTTPS
Press Edit button to edit Server Type, change to Trivial FTP and press Ok
button.
Scroll to Server address and press Edit button, then enter http:// or https://
followed by Hostname or IP Address, followed then by /tftp/
- Example for Hostname using HTTP: http://voip.bicomsystems.com/tftp/
- Example for Hostname using HTTPS: https://voip.bicomsystems.com/
tftp/
- Example for IP Address using HTTP: http://192.168.1.10/tftp/
- Example for IP Address USING HTTPS: https://192.168.1.10/tftp/
Press Back button twice, then press Select button to Save Configuration.
Auto provisioning process will start during phone reboot process, phone will pickup
appropriate configuration file from PBXware. If everything is done as above
described, you should have successfully registered your phone to PBXware. Dial
© 2003 - 2012 Bicom Systems
Registering Phone 13