Forwarding All Incoming Calls - Polycom ACC-1144 PUG Quick Reference Manual

Rejecting a Page
1. To ignore a page, press the "Reject" button

Forwarding All Incoming Calls

You can configure your phone so that all incoming calls are forwarded to another
party (known as static forwarding). You can choose to:
• Forward all calls
• Forward calls when your phone is busy
• Forward call when you do not answer your phone
Note: both forwarding on no answer and busy are set to forward to your voicemail
box.
To enable call forwarding to another party:
1. Press the Forward soft key
2. Using
•
•
•
3. Depending on your selection:
a. If you select Always, enter a number to forward all future incoming
b. If you select No Answer, enter a number to forward all unanswered
c. If you select Busy, enter a number to forward all future incoming calls
4. Select the Enable soft key to confirm call forwarding.
5. Select the Exit soft key to cancel any changes.
6. The idle display returns with a moving arrow as the line label to confirm
call forwarding is enabled.
Disable Call Forwarding
1. Press the Forward softkey
2. Using
Select soft key.
3. Press the Disable soft key to turn off call forwarding.
7
select the forwarding type you want to change and then press
. The options are:
Always—For all incoming calls
No Answer—Once all options to accept calls have been taken
Busy—When you are already in a call
calls to.
incoming calls to and how many rings to wait before forwarding (one
ring is approximately six seconds). A value of 4 is recommended.
to when you are already in another call.
select the forwarding type you want to change and then press the