Stove Leg Installation - Lopi Endeavor Owner's Manual

35
5. Attach the door handle
following the directions to
the right.
6. Replace the door on the
hinges and latch the door.

Stove Leg Installation

Part Numbers: Brass # 99200500, Cast Black # 99200800, Sculptured Steel # 99200105

Raise the stove 8" (use lumber). Attach each leg following the instructions below.
Attach each leg to the stove by
inserting a bolt and washer through the
hole or slot in the leg and into the
threaded hole on the stove.
These rubber-tipped bolts are for leveling the stove.
Make sure they contact the floor. Do not adjust
with weight on the legs, the rubber tips may tear.
© Travis Industries
Index
100-01334
9/16" Wrench
9/16" Socket Wrench
4131122