Stove Leg Installation - Lopi Answer Owner's Manual

Wood stove / inbuilt

Hide thumbs Also See for Answer:

Table of Contents

Stove Leg Installation

Part Numbers: Brass # 99200500, Cast Black # 99200800, Sculptured Steel # 99200105



Raise the stove 8" (use lumber). Attach each leg following the instructions below.

Attach each leg to the stove by

inserting a bolt and washer through the

hole or slot in the leg and into the

threaded hole on the stove.

These rubber-tipped bolts are for leveling the stove.

Make sure they contact the floor. Do not adjust

with weight on the legs, the rubber tips may tear.

Optional Equipment

100-01278

9/16" Socket Wrench

4111128

Table of Contents