LifeSize User Manual page 27

Changing Video Inputs
LifeSize video communications systems support two video streams. The primary input is the
main video stream that you send to the far side during a call usually from a camera
connected to the system. The presentation input is the video you send when you want to
show a presentation to the far side, such as a spreadsheet or a slide show on a personal or
laptop computer connected to the system. You can change the primary and presentation
inputs when the system is idle or during a call. Refer to "Initiating a Presentation" on page 29
for more information about presentations.
If you are using two cameras with a LifeSize Room system, only one camera can be active
and capturing video images at any time, even if both are connected to the system.
Changing the Primary Input
• When the system is idle and the main screen appears in the display:
Black Remote Control:
a. Press input
The Primary Input selection dialog appears and contains small representations of
the available input sources.
b. Use the arrow keys to select a new input and then press OK.
Silver Remote Control:
a. Press near
The Primary Input selection dialog appears and contains small representations of
the available input sources.
b. Use the arrow keys to select a new primary input and then press OK.
• During a call from any call screen:
Black Remote Control:
a. Press the input
The Primary Input selection dialog appears and contains small representations of
the available input sources.
b. Use the arrow keys to select a primary input and then press OK.
LifeSize Video Communications Systems User Guide
+ .
+ .
button.
27