LifeSize User Manual page 26

After you select the far end participant whose camera you wish to control, you can choose
the far end input device to control by pressing the far
input devices that are available for selection appears. Use the arrow keys on the remote
control to select a device and then press OK.
Using Camera Presets During a Call
You can configure a camera preset before placing a call or during a call. To configure a
camera preset on the near camera before placing a call, refer to "Configuring Camera
Presets" on page 12. To configure a camera preset during a call, ensure that the numeric
keys are functioning as presets as indicated in the following steps, select the camera you
wish to control, and then configure the preset.
To use a camera preset during a call, follow these steps:
1. In the navigation bar from any call screen, Presets must appear to the right of the
numeric keys icons in the navigation bar to indicate that the numeric keys on the remote
control are functioning as presets. If Touch Tones appears instead, change the function
of the keys to Presets by doing the following:
- Black Remote Control:
Press the
- Silver Remote Control:
Access the Call Manager by pressing OK. Use the arrow keys to select Presets
and then press the
The Presets label appears next to the numeric key icons in the navigation bar of the
user interface.
Note: To use presets during a call, you must use the remote control.
2. To use a preset, press the numeric key on the remote control that represents the preset
you wish to use. Preset x, where x is the numeric key associated with the preset,
appears on the screen.
If you configured a preset for a far end camera of a participant in the call, you must
select the far end camera to use the preset. Refer to "Controlling a Far End Camera" on
page 25.
Note: The numeric keys work as presets during a call only when you are in a call
screen.
26
button.
button to close the Call Manager.
LifeSize Video Communications Systems User Guide
camera button. A menu of the