CDN DTC450 Quick Manual

Perfect For
• Candy and high temperature cooking
Easy To Use
• 7 preprogrammed candy stages with unique alerts
• 1 all-purpose temperature stage
• Dual progress display
• Temperature guide
Features
• 8.5"/21.6 cm stem
• Shatterproof
• Food-safe ABS plastic
• Stainless steel stem
• Auto-off after 1 hour
• Adjustable stainless steel clip
• Mounting: pocket clip
• Batteries & instructions included
Note: Remove sticker from display before use.
Digital Candy Thermometer
Note: In the following instructions, names of the control
buttons are shown in CAPS. Function information that appears
on the display is shown in BOLD CAPS.

Battery Installation

Batteries are installed. Replace batteries when LCD
becomes dim or alarm level declines. Turn off before
installing the battery, as a malfunction may occur
if the power is on when the battery is installed. If a
malfunction occurs, restart.
1. Remove battery cover on the back by sliding it
in the direction of the arrow.
2. Install two LR44 batteries with positive (+)
side up by slipping battery under metal tab and
pressing down.
3. Replace the battery cover until it clicks shut.

Operating Instructions

A. On/Off
1. Press the MODE button to turn the DTC450 on.
2. The DTC450 will turn off automatically when
the temperature is less than 104°F/40°C for
1 hour.
B. Temperature Scale
Press and hold the MODE button for 3 seconds to
change from Fahrenheit to Celsius or vice versa.
C. Temperature Alert
1. As a matter of safety, always position the
DTC450 on the pot before filling it and/or
applying heat.
CAUTION: Always wear a heat resistant glove to touch
the stainless steel stem during or just after use. Do not
touch with bare hands.
2. Press the MODE button to turn the DTC450 on.
3. Press the button repeatedly to select the desired
candy stage or all-purpose thermometer. The
display cycles through THREAD, SOFT
BALL, FIRM BALL, HARD BALL, SOFT
CRACK, HARD CRACK, CARAMEL, and
TEMP (appearing in the upper portion of the
display) each time the button is pressed. Each
candy stage changes the temperature displayed
next to SET on the lower portion of the display.
The current temperature appears in the center
of the display.
Model: DTC450
14 to 450°F/-10 to 232°C