Table of Contents
Advertisement
Turn Off:
#144#0#
Response:
SMS notification upon power source change - disabled
Notifications when enabled:
External power applied:
External power removed:
Auto-Disarm YOYOCam
In some circumstances YOYOCam may be repeatedly triggered, for example by an employee at work
who does not know how to disarm YOYOCam. You can configure YOYOCam to stop sending alarm
messages after a given number of times by auto-disarming.
To set number of alarms before auto-disarm:
Command:
#139#Times#
Example:
#139#3#
Response:
Disarm the YOYOCam after 3 alarms
Note: Times must be at least 1.
Note: After the given number of alarms, YOYOCam auto-disarms and sends an SMS:
YOYOCam has auto-disarmed
Note: The counter is reset each time YOYOCam is manually disarmed or armed.
To enable or disable auto-disarm:
Turn On:
#138#1#
Response:
Disarm the YOYOCam after several alarms - enabled
Turn Off:
#138#0#
Response:
Disarm the YOYOCam after several alarms - disabled
Language
English:
#127#1#
Response:
Language set to English
Turn Off:
#127#0#
Response:
Svenska - installt
External power – resumed
External power lost. Running on battery.
(Default)
(Default)
35
Advertisement
Table of Contents
