YOYOMOTION YOYOCam User Manual page 48

Problem: Remote Control does not operate
Possible Cause: Remote control has not been paired with YOYOCam
Possible Solution: Follow the procedure Pairing your YOYOCam with a Remote Control.
Possible Cause: Remote control battery is low..
Possible Solution: Replace the battery. The correct type is a CR2032 manufactured by Panasonic.
Possible Cause: You are too far away from YOYOCam.
Possible Solution: Move closer to YOYOCam. Note that steel doors and solid walls will reduce the
operating distance.
Problem: Error response ERR_IND 4_0
YOYOCam responds: The network is busy. No image has been sent. ERR_IND 4_0.
Possible Solution: Check that MMS settings are correct.
Problem: Error response Wrong parameters. Please check and try again.
YOYOCam did not understand the parameters included with the SMS command. For example, in
command #33#Quantity#, #33#1# will fail because Quantity must be between 2 and 8..
48