Table of Contents
Advertisement
USER phone number:
+46702222222
+46703333333
Sensor:
Emergency phone number:
+46701111111
+4670555555
Get help with commands
You can get a reminder of YOYOCam's commands by sending #09#.
To get a command list:
Command:
#09#
Response:
#00# Set as Master
#01# Arm YOYOCam
#02# Disarm YOYOCam
#03#Password#Quantity# Request images
#04#OldPassword#NewPassword# Change 4-digit password
#05#SensorDescription# Load sensor
#06#number# Add USER phone number
#07# Report Status
#08#Password# Reset to default settings
#22#0# Disable motion detection
#22#1# Enable motion detection
Mobile Network settings
YOYOCam uses MMS (Multimedia Messaging Service) to send images and Email messages.
YOYOCam automatically configures the necessary MMS settings for the major Scandinavian
networks. If your SIM is issued by some 'Mobile Virtual Network Operators' (MVNO) then you may
need to enter the correct settings.
Checking MMS Configuration
To check presently-configured MMS parameters:
Command:
#55#
Example:
MMSC: http://mmsc.t-mobile.co.uk:8002
IP: 149.254.201.135
37
Advertisement
Table of Contents
