Table of Contents
Advertisement
Wireless Sensors
You can also add external wireless sensors which trigger the alarm.
Alarm Settings
You can tell YOYOCam what to do when the alarm is triggered
Warning Bleep from YOYOCam.
YOYOCam bleeps for approximately 5 seconds when the alarm is triggered.
Turn On:
#130#1#
Response:
Warning signal - enabled
Turn Off:
#130#0#
Response:
Warning signal - disabled
SMS Message
YOYOCam sends the Master an SMS when the alarm is triggered, for example:
Alarm from IR sensor received. Image quantity is 5
Turn On:
#11#1#
Response:
SMS notification upon Alarm - enabled
Turn Off:
#11#0#
Response:
SMS notification upon Alarm - disabled
MMS Message
YOYOCam sends the Master an MMS including the number and size of image configured in the
image settings (default: 5 images of 320 x 240 pixels).
The MMS includes text with a timestamp and the sensor which triggered the alarm, for example:
YOYOCam – 203849 Infrared
In this example the timestamp is 20:38:49 (8:38pm and 49 seconds) and the trigger sensor is the
infrared movement detector.
Turn On:
#12#1#
Response:
MMS notification upon Alarm - enabled
Turn Off:
#12#0#
Response:
MMS notification upon Alarm – disabled
See Image settings for more information about the image format.
Email Message
YOYOCam sends an Email to the configured Email address including as attachments the number
and size of images configured in the image settings (default: 5 images of 320 x 240 pixels).
(Default)
(Default)
(Default)
29
Advertisement
Table of Contents
