Table of Contents
Advertisement
Sensor Settings
You can set up which sensors trigger the alarm when YOYOCam is armed.
Infrared Body Detector
The infrared body detector works by detecting the heat emitted from a body moving in front of it.
Turn On:
#118#1#
Response:
Infrared sensor - enabled
Turn Off:
#118#0#
Response:
Infrared sensor – disabled
Note: When YOYOCam is operating on low battery, the infrared body detector is automatically
disabled. It is not possible to re-enable it until the battery has been charged or external power is
connected.
Camera Motion Detection
YOYOCam takes images periodically and compares the latest image with the previous one. If there is
a significant difference, YOYOCam assumes something has moved, for example a person has
walked in front of the camera. YOYOCam raises the alarm.
Turn On:
#22#1#
Response:
Motion detection - enabled
Turn Off:
#22#0#
Response:
Motion detection – disabled
Note: When YOYOCam is operating on low battery, the camera movement detector is automatically
disabled. It is not possible to re-enable it until the battery has been charged or external power is
connected.
Note: Be careful to position YOYOCam so that there is no unwanted motion in view, for example a
tree shaking in the wind or a cat jumping in to the field of vision.
Motion Detection Sensitivity
You can adjust the sensitivity for motion detection on a scale from 1 (least sensitive) to 5 (most
sensitive. The default is 4.
Command:
#36#Sensitivity#
Example:
#36#3#
Response:
Motion detection sensitivity has been set to 3
(Default)
(Default)
28
Advertisement
Table of Contents
