Table of Contents
Advertisement
Sensor Settings.
Configure how YOYOCam signals alarms
By default, YOYOCam sends SMS and MMS to the Master when an alarm is triggered. You can also
send alarms by E-mail and voice calling. Additionally, YOYOCam can be set to bleep when the alarm
is triggered. For more information, see Alarm Settings.
Change the Password
For security, you must immediately change the Password from the default of 1234 to your own value.
Command:
#04#OldPassword#NewPassword#
Example:
#04#1234#6789#
Response:
Password was successfully changed to 6789
For more information, see Guest Users & Password.
Add users
Add users so that other people can also control YOYOCam, request images and dial in to hear audio
from YOYOCam.
Command:
#06#UserNumber#
Example:
#06#+46702222222#
Response:
+46702222222 USER phone number has been added
For more information, see Master, Users & Guests.
Add Remote Controls
Before the supplied Remote Controls work with YOYOCam, they must be paired. You can also
configure how YOYOCam responds when the Emergency button is pressed. See Using the Remote
Control for more information.
17
Advertisement
Table of Contents
