Assembling The Blades - Hunter 42798-01 Owner's Manual

6 • Installing the Ceiling Plate Cover(continued)
6.5
4
Align the tabs on the trim ring opposite the grooves in the hanger ball.
Using both hands, push the ceiling mounting plate cover trim ring (4) up
to the top of the ceiling mounting plate cover. The ceiling mounting plate
cover trim ring will snap and lock into place.
66
7.1
46
Squeeze the rubber blade grommets (66) into the holes in the blades (46).
3
Should you need to remove the trim ring, press firmly on opposite sides of
the trim ring (4) directly above the groove in the hanger ball. The tabs will
flex out releasing the ceiling mounting plate cover trim ring (4).
7 • Assembling the Blades
Attach each blade (46) to a blade arm (98) using three blade assembly
screws (67). The blades may appear slightly loose after screws are
tightened. This is normal.
14 14
42798-01 • 09/16/09 • Hunter Fan Company
6.6
4
67
7.2
98
3
46