Table of Contents
Advertisement
Quick Links
For Your Records and Warranty
Assistance
Model Name: _____________________
Catalog/Model No.: ________________
Serial No.: ________________________
Date Purchased: ___________________
Where Purchased: _________________
For reference also attach your receipt or a
copy of your receipt to the manual.
installation and
operation manual
for Hunter
Ceiling Fans
TYPE 2 Models
42762-01 • 07/19/07
Advertisement
Table of Contents
Related Manuals for Hunter 42762-01
Summary of Contents for Hunter 42762-01
- Page 1 Model Name: _____________________ Catalog/Model No.: ________________ Serial No.: ________________________ Date Purchased: ___________________ Where Purchased: _________________ For reference also attach your receipt or a copy of your receipt to the manual. installation and operation manual for Hunter Ceiling Fans TYPE 2 Models 42762-01 • 07/19/07...
-
Page 2: Table Of Contents
8 • Operating and Cleaning Your Ceiling Fan ....... 13 9 • Troubleshooting ....14 ©... - Page 3 Support Brace Ceiling Outlet Box Angle Mounting Style Angled Mounting recommended for a vaulted or angled ceiling 42762-01 • 07/19/07 • Hunter Fan Company Understanding Mounting and Installer’ s Choice® Hunter’s patented 2-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of two ways, depending on ceiling height and your preference: Low Profile or Angled mounting. The steps in this manual include instructions for all two Installer’s Choice mounting methods. Considering Optional Accessories Consider using Hunter’s optional accessories, including a wall-mounted...
-
Page 4: Getting Ready
To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: • Electric drill with 9/64” bit... -
Page 5: Installing The Ceiling Plate
CAUTION: To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel. -
Page 6: Assembling And Hanging The Fan
3-1. Unbundle the wires from the fan. For Standard or Angle mounting: 3-2. To assemble fan to hang down from a flat or angled ceiling, insert the downrod through the canopy. Feed the wires from the fan through the downrod. 3-3. Loosen the square head set screw on the adapter to install the downrod. -
Page 7: Wiring The Fan
4-3. Connect the bare or green ground wire (grounded) from the ceiling to the green ground wire (grounded) from the ceiling plate and the green ground wire from the fan. 4-4. Connect the white wire (ungrounded) from the ceiling to the white wire (ungrounded) from the fan. -
Page 8: Installing The Canopy
5 • Installing the Canopy 5-1. Holding the canopy, raise the fan off the hook. 5-2. Align the holes in the canopy with the mounting holes on the ceiling plate. 5-3. Insert and tighten the mounting screws securely. Canopy Steps 5-1– 5-3 Mounting Screw 42762-01 • 07/19/07 • Hunter Fan Company... -
Page 9: Assembling The Blades
Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades. 6-2. Attach each blade to a blade iron using three blade assembly screws. If you used grommets, the blades may appear slightly loose after screws are tightened. -
Page 10: Completing Your Installation With Or Without A Bowl Light Fixture
7-5. If you want to install the light fixture, proceed with step 7-6 now. If you do not want to install the light fixture, you need to uninstall it now. See “Uninstalling the Light Fixture” on step 7-15. Once you have uninstalled the light fixture, continue with step 7-6. 42762-01 • 07/19/07 • Hunter Fan Company Steps 7-1 – 7-3 Housing Gasket Assembly Upper... - Page 11 Be sure no bare wire or wire strands are visible after CAUTION: making connections. Light Fixture Mounting Screws Light Fixture Mounting Screw 42762-01 • 07/19/07 • Hunter Fan Company Lower Switch Housing Washer Light Fixture Assembly Steps 7-7 Gasket...
- Page 12 7-13 Insert the globe into the fixture. Install and tighten the thumbscrews manually. Do not overtighten. Note: If thumbscrews are pre-threaded, loosen the screws before inserting the globe, then retighten securely. Globe 42762-01 • 07/19/07 • Hunter Fan Company Steps 7-6 – 7-7 Lower Switch Housing Plug...
-
Page 13: Fan
8 • Operating and Cleaning Your Ceiling Fan 8-1. Turn on electrical power to the fan. 8-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low and Off. • Pull the chain slowly to change settings. • Release slowly to prevent the chain from recoiling into the blades. • The chain uses a breakaway connector that separates if the chain is jerked. If this happens, simply reinsert the chain into the connector. -
Page 14: Troubleshooting
2. Check to see if the blade is cracked. If so, replace all the blades. Problem: Excessive wobbling. 1. If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade iron screws.