Table of Contents
Advertisement
Quick Links
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 42774-01
20090612
©2009 Hunter Fan Co.
Type T Models
Type T Models
Type T Models
Owner's Guide and Installation Manual
Advertisement
Table of Contents
Related Manuals for Hunter 42774-01
Summary of Contents for Hunter 42774-01
- Page 1 For reference, also attach your receipt or a copy of your receipt to the manual. __________________________________________ Model Name __________________________________________ Model No. __________________________________________ Date Purchased __________________________________________ Where Purchased Form# 42774-01 20090612 ©2009 Hunter Fan Co. Type T Models Type T Models Type T Models Owner’s Guide and Installation Manual...
-
Page 2: Table Of Contents
9 • Operating and Cleaning Your Ceiling Fan ....... 14 10 •... - Page 3 If you want to use an existing fan site, complete the following checklist to determine if the site is acceptable and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page.
- Page 4 3-1. Attach a 2” x 4” support brace between two joists. Position it to allow you to recess the bottom of the outlet box a minimum of 1/16” into the ceiling. 3-2. Check the support brace to ensure it will support the full weight of the fan and light kit.
- Page 5 Understanding Mounting and Installer’ s Choice® Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angled mounting. The steps in this manual include instructions for all three Installer’s Choice mounting methods.
-
Page 6: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 7: Installing The Ceiling Plate
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Flat Washer 42774-01 • 06/12/09 • Hunter Fan Company Isolator Ceiling Plate 3” Wood Screw... -
Page 8: Assembling The Top Housing
Make certain the housing sits flat on the adapter. 3-2. Install three (3) assembly screws (#8-32) and tighten them securely. 42774-01 • 06/12/09 • Hunter Fan Company Steps 3-1 – 3-2 Assembly Screw Top Housing Hanger Adapter... -
Page 9: Assembling And Hanging The Fan
4-1. Unbundle the wires from the fan. For Standard or Angled mounting: 4-2. To assemble fan to hang down from a flat or angled ceiling, insert the downrod through the canopy and canopy trim ring. Feed the wires from the fan through the downrod. -
Page 10: Wiring The Fan
5-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 42774-01 • 06/12/09 • Hunter Fan Company 5 • Wiring the Fan fsdfsdf... -
Page 11: Installing The Canopy And Canopy
2. Press firmly on opposite sides of the ring toward the canopy. The tabs will flex out releasing the trim ring from the canopy. 42774-01 • 06/12/09 • Hunter Fan Company Step 6-2 Canopy Steps 6-4 – 6-5 Canopy... -
Page 12: Assembling The Blades
7 • Assembling the Blades 7-1. Attach each blade to the fan using three blade assembly Step 7-1 screws. Blade Assembly Screw 42774-01 • 06/12/09 • Hunter Fan Company... -
Page 13: Installing The Switch Housing
Push plug and small cover in place. It will be a snug fit against the large cover. 42774-01 • 06/12/09 • Hunter Fan Company Reversing Switch... -
Page 14: Fan
9 • Operating and Cleaning Your Ceiling Fan 9-1. Turn on electrical power to the fan. 9-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low and Off. • Pull the chain slowly to change settings. -
Page 15: Troubleshooting
1. Check to make sure the wattage and type of light bulbs installed match the specifications on the light socket. 2. Turn the power to the fan off at the wall switch. Wait 30 seconds, then resume power to the fan.