Quick Start Reference Guide - Amana AXP520 Service Manual

Quick Start Reference Guide

Refer to Product Safety Manual for Safety Statements.
Oven Controls
T
he oven touch screen displays
menu options. The dial, keypad
and touch screen can be used to
navigate through onscreen menus. This guide will focus
primarily on the dial control for menu navigation.
Dial Menu Navigation
1. Rotate the dial clockwise to scroll through menu options.
2. The current menu selection will be highlighted.
3. To select menu item, press dial.
The icons below will be used throughout this guide to
indicate when menu navigation other than the dial is
necessary.
TOUCH SCREEN
KEYPAD
Selecting a Function
Highlight menu items by rotating the dial. Push
the dial to select.
Getting Started
Preheating the Oven
This oven can be set to a preheat temperature
between 200°F and 520°F (95°C and 270°C).
1. Oven must be plugged in.
2. The Preheat Temperature the oven is set to will appear at
the top of the display.
2. Rotate the dial to highlight the PRESS TO PREHEAT button
and press to select.
3. Oven Preheating status menu will display until oven reaches
preheat temperature. The main menu screen will then
appear.
520
PREHEAT TEMP 520° F
Programming or Changing Preheat Setting
To program the preheat setting:
1. Oven must be plugged in.
2. Rotate dial until CHANGE TEmP is highlighted and press
dial to select.
3 Rotate dial until desired temperature is displayed and press
knob to select.
Complete Owner's Manual available online
Push
MENU
2.
1.
Pasta-Pizza
Appet-Side
3. 4.
Seaf-Sub
Meats
5. 6.
Breakfast
Dess-Soup
MANUAL
BACK
COOK
High Speed Commercial Combination Oven
Cooking with Pre-
programmed Pads
T
o cook food using pre-programmed menu
items
1. After oven has
preheated to the
520° F
desired temperature,
highlight desired
menu category by
rotating the dial and
press to select.
2. Highlight menu item group
and press dial to select.
3. Highlight item.
4. Open oven door, place
food in oven and close door.
5. Push dial to start cooking
process.
6. At end of cooking cycle, oven
beeps and displays "DONE.
REmOVE FOOD FROm OVEN"
Using MANUAL COOK
To cook food using a specific entered time and
power level.
1. After oven has preheated,
Select MANUAL
COOK option on
the menu screen by
rotating dial and
press to select.
2. For Stage 1, input
desired cooking
time using the dial.
Press dial.
3. Input desired
temperature.
Press dial.
4. Rotate dial until desired microwave
cooking power is displayed and
press.
5. Rotate dial until desired cooking fan
speed is displayed. Press to select.
6. Rotate dial until desired heating
setting is diplayed and press.
7. Repeat steps 2-6 for each cooking
stage, if more than one stage is
necessary.
8. Place food in oven as indicated on
the oven display.
9. Press start pad or touch screen to
start.
TOUCH SCREEN
10. At end of cooking cycle, oven beeps
and displays "DONE. REmOVE
FOOD FROm OVEN".
Note: To interrupt cooking cycle, open door. To
resume cooking, close door and press start.
30
MENU
1. 2.
Pasta-Pizza
Appet-Side
3. 4.
Meats Seaf-Sub
5. 6.
Dess-Soup Breakfast
Appet-Side
MANUAL
BACK
1. COOK
Misc
3.
Chicken
5.
Fries
BACK
1. 1.
MENU
1.
Appet-Side
3.
Meats
5.
Dess-Soup
BACK
KEYPAD
2.
Non-Meat
4.
6.
Vegetables
MANUAL
Misc
COOK
Tater Tots 6oz Tater Tots 6oz
Jalapeno Popper 8
Nachos
Taquitos 4
2.
Pasta-Pizza
4.
Seaf-Sub
6.
Breakfast
MANUAL
COOK