Oven Performance Test - Amana AXP520 Service Manual

OVEN PERFORMANCE TEST

Note: To run Oven Performance Test the, OVEN CAVITY mUST BE AT ROOm TEmPERATURE,
and the display must read mICROWAVE ONLY mode. See below using oven as a microwave oven.
If mICROWAVE ONLY is not in display you must go to User Options and activate mICROWAVE
ONLY option.
Changing User Options:
1. Oven must be OFF.
2. Press and hold Pad "2" for 5 seconds.
3. Rotate dial to highlight: ALLOW mICROWAVE ONLY mode.
4. Press SAVE.
USING OVEN AS A MICROWAVE OVEN
This option is only available if the oven cavity temperature is less than 93
When user option MICROWAVE ONLY is set as a default, the MICROWAVE
ONLY button appears on the PREHEAT MENU.
See page 14 for Oven Performance Test procedure.
To run Performance Test using microwave only follow these steps:
1. Place filled test bowl in oven.
2. Press MICROWAVE ONLY button.
3. Press manual cook.
4. Press Pad 3 twice for 33 seconds.
5. Press Start.
6. Oven will beep, remove test bowl from oven.
7. Press OFF to return to PREHEAT MENU.
KEYPAD
°C
.
12
PREHEAT MENU
245 °C