Step 2 Installing The Supplied Software "Content Management Utility - Sony Nxcam HXR-NX70U Operating Manual

Hard disk
Disk volume required for installation:
Approximately 100 MB
Only the NTFS or exFAT file system can be
used for importing videos or registering them
for viewing.
Display
Minimum 1,024 × 768 dots
Others
USB port (this must be provided as standard,
High-Speed USB (USB 2.0 compatible)) (CD-
ROM drive is necessary for installation)
Standard installation is required. Operation is
* 1
not assured if the OS has been upgraded or in
a multi-boot environment.
64-bit editions and Starter (Edition) are not
* 2
supported.
Starter (Edition) is not supported.
* 3

Notes
Operation with all computer environments is

not assured.
The supplied software "Content Management

Utility" is not supported by Macintosh
computers.
Step 2 Installing the supplied
software "Content Management
Utility"
Install "Content Management Utility"
before connecting your camcorder to a
computer.

Confirm that your camcorder is
not connected to the computer.
 Turn on the computer.
Log on as an Administrator for

installation.
Close all applications running on the

computer before installing the software.
US


Place the supplied CD-ROM
"Content Management Utility" in
the disc drive of your computer.
The installation screen appears.
If the screen does not appear, click

[Start]  [Computer] (in Windows
XP, [My Computer]), then double-click
[SONYCMU(E:)] (CD-ROM).
 Select the language for the
application to be installed, then
click [OK].
 When the install wizard screen
appears, click [Next].
 Confirm the license agreement,
and if you accept the terms, click
[Next].

Select the drive or folder to install
the application, then click [Next].

Select the option to create the
desk-top shortcut, then click
[Next].

Turn on your camcorder, then
connect the camcorder to the
computer using the supplied USB
cable.