Sony Nxcam HXR-NX70U Operating Manual page 106

( Warning indicators pertaining to
external media formatting)
The external media device may be damaged.

The external media device is not formatted

correctly.
(Warning indicator pertaining to
camera-shake warning)
The amount of lights is not sufficient, so

camera-shake easily occurs. Use the flash.
The camcorder is unsteady, so camera-shake

easily occurs. Hold the camcorder steady with
both hands and record the image. However,
note that the camera-shake warning indicator
does not disappear.
(Warning indicator pertaining to
photo recording)
The recording media is full.

Photos cannot be recorded during processing.

Wait for a while, then record.
When [ REC Mode] is set to [Highest

Quality ] or [60p Quality
capture photos while recording movies.
Furthermore, if [
[24p], you cannot record photos while the
camcorder is in movie recording standby
mode.
Tips

You may hear a melody when some warning

indicators appear on the screen.
US
10
], you cannot
Frame Rate] is set to
Description of warning messages
If messages appear on the screen, follow the
instructions.
Recording media
Cannot recognize the internal memory.
Format and use again.
The internal recording medium of the

camcorder is set differently from the default
format. Performing [Format] (p. 58) may
enable you to use your camcorder. This
will delete all data in the internal recording
medium.
Data error.
An error occurred during reading or writing

the internal recording media of the camcorder.
If the message is preceded by a GPS indicator,

there may be some trouble with the GPS
receiver. Turn on your camcorder again.
This may occur when you keep applying shock

on the camcorder.
Movies recorded on other devices may not be

played back.
Inconsistencies found in image database
file. Do you want to repair the image
database file?
Inconsistencies found in image database
file. Cannot record or play HD movies. Do
you want to repair the image database
file?
You cannot record or play back movies

because no movie management information
exists. If you touch [OK], new management
information is created and you can record or
play back movies.