Sony Nxcam HXR-NX70U Operating Manual page 88

 Aspect
You can display markers at the boundaries
of the display area defined by 4:3 the aspect
ratio. The default setting is [Off].
 Safety Zone
When you select [80%] or [90%], you can
display markers at boundaries of display
area that regular home TVs can display.
The default setting is [Off].
 Guide Frame
When you select [16:9] or [4:3], you can
display frame markers that help you to
check horizontal and vertical positions of a
subject. The default setting is [Off].

Notes
Only the time code is output to an external

device via external output jacks when [Marker]
is set to [On], even if [Disp Output] is set to
[V-Out/Panel].
You cannot display markers under following

conditions:
During expanded focus

During [Smooth Slow Rec]

When the current time is displayed after the

power is turned on
You can display markers only on the LCD panel

and viewfinder. You cannot display them on an
external device.
Tips

You can display all types of markers at the same

time.
You can obtain a balanced composition by

positioning the subject at the cross points of the
guideframe marker.
US

Camera Data Display
When you set this function to [On], you
can constantly display the iris, gain and
shutter speed settings on the screen. The
default setting is [Off].
Iris value
Gain value
Tips

The settings appear on the screen during the

manual adjustment regardless of the settings of
this function.
indicates that the settings are automatically

adjusted values.
The displayed settings are different from the

settings that will be displayed when you press
the DATA CODE button on the Wireless
Remote Commander (p. 129).
Audio Level Display
When you set this function to [On], you
can display the audio level meter on the
screen. The default setting is [On].
Shutter speed value
Audio level meter