Sony Nxcam HXR-NX70U Operating Manual page 96

Battery Info
You can check the estimated remaining
capacity of the battery.
To close the battery information screen
Touch .
Operation Time
Displays the total hours of operation in 10-
hour increments.
Date & Time Setting
 Date & Time Format
You can select one from 4 types of date and
time format.
 Daylight Savings/Summer Time
You can change this setting without
stopping the clock. Set to [On] to move the
time forward 1 hour.
 Off
Does not set the summertime.
On
Sets the summertime.
 Date & Time
See page 20.
US

Area Setting
You can adjust a time difference without
stopping the clock. Select your local area
when using the camcorder in other time
zones. Refer to the world time difference
information on page 112.
Tips

If [Auto Area ADJ] is set to [On], the area

setting (date and time) will be adjusted
automatically using GPS signals.
Auto Clock ADJ (Auto clock
adjustment)
The camcorder can maintain accurate
time automatically by acquiring time
information from the GPS system.
 On
Maintains accurate time automatically.
Off
Does not maintain accurate time using the
GPS system.

Notes
You must set the date and time on your

camcorder before using your camcorder (p. 20).
There may be discrepancies of a few seconds

even if [Auto Clock ADJ] is activated.
This function automatically adjusts the clock

when the camcorder receives GPS signals and
finishes triangulating successfully while the
power is on. Once the clock is adjusted, it will
not be adjusted until the next time you turn the
camcorder on again.
The clock may not be adjusted to the correct

time automatically using the GPS system,
depending on the country/region selected for
your camcorder. In this case, set [Auto Clock
ADJ] to [Off].