Sony Nxcam HXR-NX70U Operating Manual page 103

Playback
Images cannot be played back.
Select the type of recording media you want to

play back (p. 26).
Select the image quality of the movie you want

to play back (p. 56).
Images recorded on other devices may not be

played back. This is not a malfunction.
Photos cannot be played back.
Photos cannot be played back if you have

modified files or folders, or have edited the
data on a computer. (The file name flashes in
that case.) This is not a malfunction.
is indicated on a thumbnail.
This may appear on an image recorded on

other devices, edited on a computer, etc.
You removed the AC Adaptor or the battery

pack while the recording media icon at the top
right corner of the screen flashes, or before the
ACCESS lamp is turned off after recording.
This may damage your image data and
displayed.
is indicated on a thumbnail.
The image data base file may be damaged.

Check the data base file by touching
(MENU)  [Rec/Media SET] 
[Repair Img. DB F.]  the recording medium.
If it still appears, delete the image with
(p. 59).
No sound or only a quiet sound is heard
during playback.
Turn up the volume (p. 36).

Sounds cannot be recorded while shooting

with [Smooth Slow Rec] or [Golf Shot].
appears on the LCD screen.
This appears when you play back movies

recorded with 5.1ch surround sound. 5.1ch
surround sound is down-mixed to 2ch stereo
and played back on your camcorder.
Playing back images stored on
memory card on other devices
Images cannot be played back or the
memory card is not recognized.
The playback device does not support playing

back memory cards (p. 3).
Editing movies/photos on your
camcorder
Unable to edit.
Unable to edit because of the condition of the

image.
A movie cannot be divided.
A movie that is too short cannot be divided.

A protected movie cannot be divided.

is
A photo cannot be captured from a
movie.
The recording media where you want to save

photos is full.
Playback on the TV
Neither image nor sound is played on the
connected TV.
When you are using the component A/V cable,

set [HDMI/Component] according to the
requirements of the connected device (p. 93).
When you are using the component A/V

cable, make sure the red and white plugs of the
component A/V cable are connected (p. 38).
Images are not output from the HDMI OUT

jack, if copyright protection signals are
recorded in the images.
US
10