Recording Information On Your Location (Gps) - Sony Nxcam HXR-NX70U Operating Manual


Notes
The NightShot function uses infrared light.

Therefore, do not cover the infrared port with
your fingers or other objects.
Make sure to remove the lens hood with lens

cover (supplied) as it may prevent the proper
operation of the infrared function.
Remove the conversion lens (sold separately).

Adjust the focus manually ([Focus], p. 81) when

it is hard to focus automatically.
Do not use the NightShot function in bright

places. This may cause a malfunction.
Set [Low Lux] (p. 81) when you record photos

with color images in dim light.
Recording information on your
location (GPS)
The camcorder records information on
the location when movies or photos are
recorded (the default setting).
GPS triangulating status
Searching for the
Triangulating
Triangulating meters
US

satellites
Number of dots
changes
Unable to
triangulate
Unable to
record location
information

Notes
It may take a while before the camcorder starts

triangulating.
If the camcorder cannot triangulate, the

following operations may resolve the issue.
Move to a place where radio signals are easier

to receive.
Make sure the GPS antenna is not obstructed

by a hand, etc. (p. 128).
Tips

In the following situations, the current location

of the camcorder shown on the map may be
different from the actual location. The margin
of error can be as wide as several hundred
meters.
When the camcorder receives GPS signals

that have been reflected off surrounding
buildings.
When the GPS signal is too weak.

To display recorded location information,

(MENU)  [Setup] 
perform
(Playback Settings)]  [Data Code] 
[
[Coordinates].
Establishing priorities for location
information
See page 95.
If you do not want to record location
information
(MENU)  [Setup] 
Perform
(General Settings)]  [GPS Setting]
[
 [Off].