Sony Nxcam HXR-NX70U Operating Manual page 77

TC/UB
TC/UB Disp
TC Preset
UB Preset
TC Format
TC Run
TC Make
UB Time Rec
Edit/Copy
Delete
Protect
Copy
Direct Copy
Setup
(Playback Settings)
Data Code
(Connection)
HDMI/Component
Down Convert Type
Disp Output
HDMI TC Output
USB Connect
(General Settings)
Beep
LCD Brightness
VF Back Light
Display Setting
GPS Information
GPS Setting
Change the display of the time code/user bit.
Sets the time code.
Sets the user bit.
Selects the frame mode of the time code.
Selects how the time code advances.
Selects the recording type on the recording media.
Selects whether or not to save the actual time in the user
bit code.
Deletes movies or photos.
Protects movies or photos to avoid deleting.
Copies movies or photos.
Copies images stored on the internal recording medium
or on a memory card to some type of external media.
Displays the detailed recording data during playback.
Sets the format of the image output to HDMI and
component jacks (resolution).
Selects a down convert type when you down-covert
video signal.
Select where to output the display information, such as
time code.
Transfers time code, user bit data to the device
connected with the HDMI cable.
Uses a USB connection with the USB cable.
Sets whether the camcorder sounds operation beeps or
not.
Adjusts the brightness of the LCD screen.
Adjusts the brightness of the viewfinder.
Sets the duration of displaying the icons or indicators on
the LCD screen.
Displays location information.
Sets the GPS.
47
48
48
90
91
91
91
59
60
60
68
92
93
93
93
93
93
93
94
94
94
94
95
US