Lldp Neighbor Power Over Ethernet - Planet SGSW-24040 User Manual

Object
• Profile
• Week Day
Buttons
: click to add new rule.
: Click to save changes.
: Check to delete the entry.

4.16.6 LLDP Neighbor Power Over Ethernet

This page provides a status overview for all LLDP PoE neighbors. The displayed table contains a row for each port on which an
LLDP PoE neighbor is detected. The columns hold the following information: The screen in Figure 4-16-5 appears.
The page includes the following fields:
Object
• Local Port
• Type
• Source
Description
Set the schedule profile mode. Possible porifles are:
Profile1
Profile2
Profile3
Profile4
Show the PoE schedule mode usage of week day.
Figure 4-16-6 LLDP Neighbor Power Over Ethernet screenshot
Description
The port for this switch on which the LLDP frame was received.
The Type represents whether the device is a Power Sourcing Entity (PSE) or Power
Device (PD).
If the Type is unknown it is represented as "Resevered".
The Source represents the power source being utilized by a PSE or PD device.
If the device is a PSE device it can either run on its Primary Power Source or its
Backup Power Source. If it is unknown whether the PSE device is using its Primary
Power Source or its Backup Power Source it is indicated as "Unknown"
User's Manual of SGSW-24040 / 24240 Series
319