Bandwidth Control - Planet SGSW-24040 User Manual

The page includes the following fields:
Object
• Number of Classes
•
Port
•
Default Class
•
QCL #
•
Tag Priority
•
Queuing Mode
• Queue Weighted
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.

4.9.5 Bandwidth Control

Configure the switch port rate limit for Polices and Shapers on this page. The settings relate to the currently selected stack unit,
as reflected by the page header. The screen Bandwidth Control in
Description
Configure the number of traffic classes as "1", "2", or "4".
The default value is "4".
The logical port for the settings contained in the same row.
Configure the default QoS class for the port, that is, the QoS class for frames not
matching any of the QCEs in the QCL.
Select which QCL to use for the port.
Select the default tag priority for this port when adding a Tag to the untagged
frames.
Select which Queuing mode for this port.
Setting Queue weighted(Low:Normal:Medium:High) if the "Queuing Mode" is
"Weighted".
192
User's Manual of SGSW-24040 / 24240 Series
Figure 4-9-10 appears.