Static Mac Table Configuration; Mac Address Table Status - Planet SGSW-24040 User Manual

4.13.2 Static MAC Table Configuration

The static entries in the MAC table are shown in this table. The static MAC table can contain 64 entries.
The maximum of 64 entries is for the whole stack, and not per switch.
The MAC table is sorted first by VLAN ID and then by MAC address. The Static MAC Table Configuration screen in
4-13-2 appears.
The page includes the following fields:
Object
•
Delete
•
VLAN ID
•
MAC Address
•
Port Members
Buttons
: Click to add new entry.
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.

4.13.3 MAC Address Table Status

Dynamic MAC Table
Entries in the MAC Table are shown on this page. The MAC Table contains up to 8192 entries, and is sorted first by VLAN ID,
then by MAC address. The MAC Address Table screen in
Figure 4-13-2 Static MAC Table Configuration page screenshot
Description
Check to delete the entry. It will be deleted during the next save.
The VLAN ID for the entry.
The MAC address for the entry.
Checkmarks indicate which ports are members of the entry. Check or uncheck as
needed to modify the entry.
Figure 4-13-3
User's Manual of SGSW-24040 / 24240 Series
appears.
280
Figure