Arming & Disarming; Exit Delay; Disarming & Deactivating An Alarm - Paradox Spectra 1689 User Manual

4.0 Arming & Disarming
Take full advantage of your Spectra system by familiarizing
yourself with all the arming methods.
If your system is not partitioned (section 2.7 on page 12),
everything is considered as belonging to Partition 1.

4.1 Exit Delay

After entering a valid arming sequence, an Exit Delay Timer
will provide you with enough time to exit the protected area
before the system arms. The keypad may beep during the
Exit Delay.
4.2 Disarming & Deactivating an Alarm
To disarm an armed system or an alarm, enter your access
code. An entry point, like the front door, will be programmed
with one of two Entry Delay Timers. When an entry point is
opened, the keypad will beep until you disarm the system.
Your alarm system will not generate an alarm until this timer
elapses. Any user can disarm a partition they have been
assigned to, except users assigned with the Arm Only
Option. To disarm alarms generated by a Delayed Fire Zone,
please refer to Fire Alarms on page 33.
How do I deactivate an alarm?
Enter your [
16 User's Manual
ACCESS CODE
].