Paradox 1686V User Quick Reference Manual

User Quick Reference Guide (1686V & 1686H)
AC LIGHT
On = AC power on
Off = Power failure
Press and hold the [
PG
seconds to activate:
__________________________
(i.e. garage door, smoke reset, etc.)
Made a mistake?
Press the [ ] key to re-enter
CLEAR
data, exit the current mode or
cancel an action.
R :
Arms entire partition when all
EGULAR
zones are closed.
Enter your [
ACCESS CODE
hold the [ ] key for 3 seconds).
†
ENTER
F :
Arms entire partition without waiting
ORCE
for all zones to close.
Press the [ ] key, and then enter your
FORCE
[ ]* (or press and hold the
ACCESS CODE
[ ] key for 3 seconds).
†
FORCE
*If keys [1] and [2] flash, you must specify which partition you wish to arm or disarm by pressing the
corresponding key.
†
Must be enabled by your installer.
K
EYPAD
] key for 3
1686V LED Keypad
H
OW TO
]* (or press and
Enter your [
O
VERVIEW
A D
RM AND ISARM
S :
Arms partition's perimeter only, which
TAY
allows you to remain in the protected area.
Press the [
[
ACCESS CODE
[ ] key for 3 seconds).
†
STAY
I :
Stay arms partition, but an alarm
NSTANT
will occur instantly if a zone opens, including
entry delay zones.
After Stay arming, press and hold the
[ ] key for 3 seconds.
†
STAY
Disarming
]*.
ACCESS CODE
ARM LIGHTS
On = Partition armed
Off = Partition disarmed
Flash = Partition Stay armed
Fast Flash = Partition in
alarm
READY LIGHT
On = All zones are closed
Off = Zone(s) open or armed
Flash = Exit Delay indicates
that the system will become
armed soon
A numeric key illuminates if its
corresponding zone is open.
] key, and then enter your
STAY
]* (or press and hold the