Advantech IPPC-8151S Series User Manual page 31

Touch Gesture Utility Setup
Please go to PenMount control panel and click gesture setting button.
A. Enable / Disable Touch Gesture
B. Gesture Sensing Time
The time is to complete one gesture. Value can be set from 200ms to
2500ms.
C. Gesture Setting
The setting for the individual gesture. The blue color means the gesture
has been enabled. The gray color means the gesture has been disabled.
D. Disable the individual gesture
E. Hotkey Setting
When the gesture is detected, system will receive the hot key value by the
setting.
F. Application Setting
When the gesture is detected, system will execute the application by the
setting.
G. Action Setting
When the gesture is detected, system will take action by the setting.
23 Chapter 4