Operating Instruction - PureLink DTS50R Owner's Manual

Front Panel:
PWR: Power LED indicator
ST: Status LED indicator
MODE: EDID library rotary switch
EDID S/W: EDID save button
Side Panel:
IR voltage: 5V / 12V select switch
Rear Panel:
DVI IN, OUT: DVI-D Input/output port
Audio IN, OUT: 3.5mm stereo Input/output port
CONTROL, AV: CAT5 connection ports
IR: IR signal Input/output port
RS232C: RS-232 signal Input/output port
DC 12V: Power input port

Operating Instruction

EDID library
: Use MODE rotary switch on the front panel of DTS50R to select EDID to use.
EDID library list;
0- External EDID
1-800x600 60Hz , 2-1024x768 60Hz , 3-1280x768 60Hz ,4-1280x1024 60Hz
5-1360x768 60Hz ,6-1366x768 60Hz , 7-1400x1050 60Hz , 8-1600x900 60Hz
9-1600x1200 60Hz , A-1680x1050 60Hz ,B-1920x1200 60Hz , C-HD1080i 60Hz
D-HD1080p (2CH) , E-HD1080p(Multi)
External EDID;
Connect display device to DTS50R's DVI port and then press EDID S/W button.
It will copy and save display's EDID information to DTS50R's EEPRom.