Traffic Information Function - Skoda Bolero Operating Instructions Manual

Save a radio station on a displayed station key
›
Continue to press one of the six station keys
main menu until a signal tone sounds. The currently heard radio station is then
stored on this station key.
Deleting a radio station from the memory list
›
In the RADIO main menu, press the function key
list.
›
Press the function key behind the station you wish to delete.
Delete
›
Confirm the following safety interrogation by pressing the function key
to finally remove the station from the memory list.
If the currently heard radio station is already saved in the preset list, the memory
space number is displayed behind the description of the frequency range (FM or
AM).
Use the Setup radio main menu, to determine which of the six station keys are to
be displayed in the main menu RADIO.
Function SCAN
The stations of a waveband can be played briefly one after the other (for ten sec-
onds).
›
Press the set button , the radio searches automatically all available stations
2
of the current waveband.
›
Alternatively, press the function key
up window.
›
During the current automatic play the function key will change from
.
Scan

›
Press the set button or function key
2
of the currently heard radio station.
RDS functions
Switching radio text on and off
›
In the RADIO main menu, press the function key
key . Instead of the six station keys, the window for displaying the ra-
Radio text
dio text is now opened in the lower half of the display.
›
The window for displaying the radio text must fade out again to enable the sta-
tion keys to be displayed again. Briefly press on the display window of the radio
text.
6
Basic setting
to displayed in the RADIO
1 ... 6 ...
to open the memory
Presets
and press in the opening pop-
Extras Scan
Extras
again to end the automatic play
Scan

and then the function
Extras
›
Alternatively, press the function key
shown as highlighted in the opening pop-up window.
RDS ("Radio Data System") serves to transmit program identification and addi-
tional services therefore also enabling automatic tracking of stations.
In the event of sufficiently satisfactory reception, the suitable RDS radio stations
will display the station name instead of the station frequency.
If a radio station sends additional information via the RDS function while a station
is being stored, it can occur that the name of the radio station is later displayed
Delete
incorrectly in the preset list.

Traffic information function

›
Press on the button
off.
Ð
The display "TP" in combination with a station name (e.g. in the station or preset
list), indicates a traffic programme station.
Irrespective of which radio station is heard, an additional receiver part in the unit
ensures that a traffic programme station can always be received as long as the
traffic programme function is switched on.
The operational readiness of the traffic information function is indicated by "TP"
at the top right in the display.
If no traffic programme station can be received because, for example, radio recep-
tion is interrupted in general, "No TP" will be displayed instead of "TP". Remem-
to
ber that car parks, tunnels, high buildings or mountains can interrupt the radio
signal up to the total loss of reception.
Ð
Incoming traffic announcement
When a traffic announcement is being received, a pop-up window will open.
If you wish to interrupt the transmission of the traffic announcement, press on
the function key
Cancel
programme function remains available and a following traffic announcement is
made again while the audio mode is in operation. Pressing the function key
will switch off the traffic programme function permanently.
Deact. TP
and the function key
Extras
, in order to switch the traffic information function on or
TP
in the pop-up window Traffic announcement. The traffic
Radio text
Ð
Ð