Traffic Information Memory - Skoda SYMPHONY User Manual

6 Radio
Store station
– After selecting the radio station, hold one of the station keys
which it should be stored until it briefly switches to mute and a brief
signal sounds.
Automatic station finding with storing the radio stations
– Press the button . An automatic station finding is started during
AS
which the 6 stations with the strongest signal in the memory level
FM2, TP or AM2 are stored. STORE is displayed on the display.
When storing the radio stations on the station keys
the desired radio station by pressing a station key
Note
The stored radio stations are updated and stored once again by repetitively
pressing the button AS .
Radio text
Certain radio stations transmit additional text information - designated as
radio text.
Note
•
The text information must not be available to all radio stations.
•
Depending upon the quality of the received signal, the radio needs a specific
time, in order to correctly read all the illustrated characters.
RDS functions
RDS ("Radio Data System") serves to transmit program identification and additional
services therefore also enabling automatic tracking of stations.
Ofrecido por www.electromanuales.com
A
, on
7
A
is finished, you can call up
7
A
.
7
In the event of sufficiently satisfactory reception the suitable RDS radio stations will
display the station name instead of the station frequency.
If a radio station sends additional information via the RDS function while a station
is being stored, it can occur that the name of the radio station is later displayed
incorrectly in the memory list.
Traffic reports
Activating and deactivating the traffic reports
Press the button , TP appears in the display. If a set radio station does not
TP
transmit a traffic report, the radio searches for a station which transmits the traffic
report. TP SEEK is displayed on the display.
If no radio station which transmits the traffic reports is found, NO TP is shown on
the display.
An incoming traffic report automatically interrupts the CD play function or listening
to a radio station, which at that moment is not transmitting a traffic report. INFO
PRGNAME is displayed on the display. At the end of the traffic report, the radio
automatically returns to the original play function.
If you wish to deactivate the traffic information, press once again the button
goes out on the display.

Traffic information memory

Automatic recording of traffic reports
If the traffic information function
AIM
is received and the incoming traffic reports will be recorded as long as the ignition
is switched on. This way you are informed at any time of the current traffic situation,
even if you have your radio switched off for a lengthy period while driving.
If the vehicle is not in use (ignition off) while a traffic information station is received
and the traffic information function is switched on, incoming traffic reports from
this station are recorded for two hours.
When switching the ignition off the current traffic information station is displayed
for about five seconds, from which the next two hours of traffic reports will be
TP
is switched on, a traffic information station
, TP