Skoda Bolero Operating Instructions Manual page 11

The CD which is currently playing, is indicated in the MEDIA main menu at the top
left of the display.
- Random play function; the tracks will be played in a random order.
Mix
– Scroll through the CD. The first 10 seconds of each title are played.
Scan
Note
CDs, which cannot be read by the CD changer, are also not selectable in the CD
selection menu of the radio (Display: "Empty").
Select track
Press the range selector key
MEDIA
Audio CD: Select track
›
Press on the function key
Selection
rently played audio CD. The currently played track is shown as highlighted.
›
Select one of the titles from the title list by briefly pressing the function key
.
Track ...
MP3 Data: Select track
›
Press on the function key
Selection
rently played title and, if necessary, to display the sub-folder contained in this
folder. The currently played track is shown as highlighted.
›
Press to choose another title. If the title you are searching for is in another
folder, you must first of all search the folder structure.
›
Press on the display of a data folder to open it (in picture:
›
Press the function key to open the appropriate higher priority folder.

Repeat title
›
Press the function key .
Repeat
›
Press in the opening pop-up window to automatically repeat the current
Track
title at the end.
›
If you press (Audio CD operation) or
CD
pop-up window the titles of the current CD or the current folder are repeated
automatically.
to switch to the main menu MEDIA.
, in order to display the title list of the cur-
, in order to display the title list with the cur-
).
F1.1.1

(MP3 operation) in the opening
Folder
Note
You can also change titels in the menu MEDIA by turning the set button
If a data carrier in the internal CD drive is ready to play, "CD int." will be indica-
■
ted at the top left in the display.
When playing MP3 data, the name of the artist, the album and the title of the
■
MP3 data will be displayed, if available, as ID3 tag.
Some audio CDs support "CD Text". With these CDs the title name is displayed
■
instead of "Track".
Ð
General information for MP3 operation
Requirements for the MP3 data and data carrier
›
CD-ROM, CD-R, CD-RW with a capacity of 650 MB and 700 MB.
›
The CDs must correspond to the ISO 9660 Level 2 standard as well as the Joliet
data system (single and multi-session).
›
Data names must be no longer than 64 characters.
›
The list structure is restricted to a depth of 8 list levels.
›
The name of the artist, the album and the title of the reproduced MP3 data can
be shown as ID3 tag, providing this information is available. The list and data
name will be displayed if there is no ID3 tag.
›
Playlists are not supported.
›
WMA data (Windows Media Audio) can also be played even if the copyright is
additionally protected by the DRM procedure (Digital Rights Management). Such
WMA data is not supported by the unit.
Bit rate (data flow per time unit)
›
The system supports MP3 data with bit rates of 32 to 320 KB/s as well as MP3
data with variable bit rates.
›
The indicated playing time data with variable bit rates is not reliable.
Information on how to use a CD
CD to jump
Uneven road surfaces and strong vibrations may cause the CD to jump.
Formation of condensation
When it is cold and after rain showers, moisture can deposit in the CD drive (con-
densation). This can effect the CD jump or impair the play function. In such cases
wait until the moisture has dissipated.
.
8
Ð
Ð

9
Basic setting