Skoda Bolero Operating Instructions Manual page 14

receivable frequency. If no alternative frequency of the set station can be found
and the station no longer offers a satisfactory quality, then please select another
station.
RDS Regional
Certain programs of the broadcasting companies are divided into regional pro-
grams at specific times. That is why in individual regions the regional programs of
a station can broadcast different contents.
First of all the unit attempts to set only alternative frequencies of the selected
station.
If the quality is however so low, that there is a risk of a "program loss", the unit
also accepts "related" frequencies.
Seek mode
Sets the source from which to select the stations in radio mode.
›
- opens the list of the presently receivable radio stations.
Station list
›
– shows only the stations that are store in the station memory.
Preset list
Preset list
Select station keys for display.
Delete preset list
Delete preset list.
Preferred TMC station
If the "preferred" TMC station can no longer be received, the system automatically
searches for the TMC station offering the best reception for the currently driven
area. You can determine in the Setup radio from which TMC station the reports
are to be announced.
Traffic station set-ups
Open the TIM settings menu by pressing the range selector key
function key .
Traffic info.
›
Press on the left of the display on TIM recording time in order to open the Set-
up of recording times menu.
›
In the Setup of recording times menu, briefly press on the arrow keys
on the display below the hours or minutes indication, in order to decrement or
increment the respective time unit.
›
Keep pressing the corresponding arrow key, in order to continuously change
the time unit. Release the button if the desired value has been reached.
12
Basic setting
›
Press the function key
and to exit the Setup of recording times menu.
›
In this way you can set both desired TIM recording times.
›
Activate or deactivate the desired TIM recording time by pressing the function
key
Active
activated.
The unit starts with the recording 90 minutes before the set start time and ends
the recording 30 minutes afterwards.
Setup Media
Open the Setup Media menu by pressing the range selector key
function key
Function keys in the menu - Setup Media
Activate AUX input
BT audio autoplay
stallation.
Hide artist/track name
ly the data and folder name will be displayed for audio CDs with CD texts and in
the MP3 operation.
Scan/Mix/Repeat including subfolders
to the sequence on the played medium, which are stored in the folders and sub-
folders.
AUX input level
Ð
function volume of a connected external audio source can be adapted to other
audio sources in three steps. Press on the function key
the desired input sensitivity in the opening pop-up window. If a multimedia sock-
et MEDIA-IN is additionally installed, this setting also applies for audio sources
which are connected to the multimedia socket.
and the
SETUP
System Setups
or
 
Call up the Setup system menu by pressing the range selector key
function key
in order to accept the indicated TIM recording time

. If the check-box is active  the accompanying TIM recording time is
.
Media
- for playback of an external audio source.
- enables a wireless transfer of MP3 data to the telephone prein-
- according to the set-ups the title and performer name or on-
- plays all MP3 data one after the other according
– the input sensitivity of the AUX-IN socket for adjusting the play
.
System
Ð
and the
SETUP
and select
AUX input level
Ð
and the
SETUP
