Basic Setting; Switching The Unit On And Off; Tone Settings; Radio Mode - Skoda Bolero Operating Instructions Manual

Basic setting

Switching the unit on and off

›
The system is switched on or off by pressing the rotary/push knob
period of time.
After switching on the unit, the last audio source that was active before switch-
ing off will be played.
If the key is pulled out of the ignition lock while the unit is switched on, the unit
will switch off automatically. You can then switch the unit on again. If the ignition
is switched off, the unit (discharge protection of the vehicle battery) switches off
automatically after approx. one hour. This process can be repeated as often as
necessary.

Tone settings

By pressing the button you can select the following parameters:

›
- Setting of bass, mid and treble;
Treble - Mid - Bass
›
- Volume ratio (left and right = balance), (front and rear = fader);
Balance - Fader
›
–
Volume Maximum switch-on volume
Switch-on volume, volume for traffic announcements, and volume when park-
ing;
›
- the car radio will increase the volume in response
Speed dependent volume control
to an increase in speed (higher figures result in a steeper increase in volume);
›
– Switching on or off the tone signal when storing the radio
Acoustic feedback
stations;
›
– Setting the equalizer (linear, language, rock, classical, ...);
EQ settings
›
– Surround sound setting.
Surround
Reducing the volume when activating the parking aid (PDC)
If your vehicle is equipped with "parking aid", the volume is automatically de-
creased to a pre-defined value, when the "parking aid" is active.
, , and
Traffic announcements Parkpilot: Audio level

Radio mode

Select radio station
Call up main menu RADIO and choose frequency range
›
for a long
1
Press to call up the RADIO main menu. The currently heard radio station
RADIO
is indicated at the top of the touch-screen.
›
To change the frequency range, press
or in the pop-up window that opens. The current frequency range is in-
FM AM
dicated on the top left on the display.
Changing radio station
›
By pressing the arrow keys on the display of the RADIO main menu, you can
change to the previous or the following station.
Ð
Select a radio station from the station list
›
Press the function key
be received. The list "skips" directly to the display of the currently heard radio
station.
›
Choose the desired station by pressing the respective selection. After about 20
seconds without operation the image of the station list will close automatically.
Function keys in the Radio main menu
to - Station keys for storing or calling up a stored radio station.
1... ...42
–
- Button for selecting the desired frequency range.
Band
- opens the list of the presently receivable radio stations.
Station list
- opens the list of the stored radio stations.
Presets
– Button for selecting the
Extras
.
Radio text
– opens the frequency band of the selected frequency range.
Man.
The process of searching for and storing the radio stations
Ð
Manual search
›
Turn the Set button
. The scale of the selected frequency range is inserted in the frequency
Man.
band in the lower part of the touch-screen.
›
Briefly press the set button to terminate the manual frequency selection and to
display once again the function keys.
or the
RADIO Band
to display all radio stations that can currently
Station list
automatic play function or for showing the
Scan
in the RADIO main menu or press on the function key
2
function key and then
Ð

5
Basic setting