Traffic Information Function - Skoda Radio Bolero Owner's Manual

RDS function
Switching radio text on and off
›
In the RADIO main menu press the
tion button. Instead of the six station buttons, a window now opens in the bot-
tom half of the screen to display the radio text.
›
The window for displaying the radio text must fade out again to enable the sta-
tion keys to be displayed again. Briefly tap in the display window of the radio
text.
›
Alternatively, tap the function button and then on the highlighted
Extras
function button shown in the opened pop-up window.
Radio Text
RDS ("Radio Data System") serves to transmit program identification and addi-
tional services therefore also enabling automatic tracking of stations.
In the case of RDS-compatible radio stations, if there is sufficient reception the
station name will be displayed instead of the station frequency.
If a radio station sends additional information via the RDS function while a station
is being stored, it can occur that the name of the radio station is later displayed
incorrectly in the preset list.

Traffic information function

›
Press the button to switch the traffic information function on or off.
TP
The display "TP" in combination with a station name (e.g. in the station or preset
list), indicates a traffic programme station.
Irrespective of which radio station you are listening to, an additional receiver part
in the device ensures that a traffic information station can always be received as
long as the traffic information function is switched on.
The availability of traffic information monitoring is identified by the letters "TP" at
the top right of the screen.
If no traffic programme station can be received because, for example, radio recep-
tion in general is poor, instead of"TP","No TP" will be displayed. Car parks, tun-
nels, tall buildings or mountains can disrupt the radio signal, even causing it to fail
completely.
Incoming traffic announcement
While a traffic bulletin is being played, a pop-up window opens.
button and then the
Extras Radio text
To pause the playback of the announcement, in the Traffic bulletin pop-up win-
dow press the function button. The traffic function remains available but a
Cancel
subsequent traffic bulletin is played in the current audio mode. Press the function
button to switch off the traffic information function permanently.
TP deact.
func-
Traffic information memory
Automatic recording of traffic reports
If the traffic information function is switched on and ready to receive the traffic
information station, incoming traffic reports are recorded as long as the ignition is
switched on. This means you can always find out about the current traffic situa-
tion, even if the radio is switched off while driving for long periods.
If the car is parked (ignition off) while a traffic radio station is in range and the
traffic is turned on, incoming traffic reports from this station are recorded for two
hours.
When the ignition is switched off, for about five seconds the current traffic infor-
mation station from which traffic reports will be recorded for the next two hours
is shown. During this five-second display you can use the arrow keys on the de-

vice to select another traffic information station from which to record.
If, when the vehicle is not in use, the reception of the set traffic information sta-
tion is too poor because of external influences, it will automatically search for an-
other traffic information station.
A maximum of nine traffic announcements with a total length of up to four mi-
nutes can be recorded. The oldest traffic report will always be overwritten if the
memory is full.
TIM recording times
It is also possible to set two TIM recording times at which the device should also
record traffic information even if the vehicle is switched off. Then the radio starts
according to the set TIM recording time with the recording of all the incoming
traffic reports on the set traffic information station.
For example, if you drive to work every day at a certain time the vehicle, simply
enter the approximate start time. The radio starts with the recording 90 minutes
before the set start time and ends the recording 30 minutes afterwards. You can
then listen to the latest traffic reports before each journey and adjust your route
to the current traffic situation.


11
Radio