Skoda Bolero Operating Instructions Manual page 16

›
You can delete the characters in the entry line from left to right by pressing the
function key .

›
Press function key when the desired call number is indicated in the entry

line. The connection to the entered call number is established.
When entering the country code, you can enter the "+" character instead of the
the first two digits (e.g., "00"). For this step, hold the function key
tle triangle " " pressed until a pop-up window with the function keys

fades in. Press to accept the desired character into the entry line - the pop-up
window will close. If no entries are entered, the pop-up window will close auto-
matically after a few seconds.
The special keys "Stars" and "Rhombus"
*
a telephone keypad. These characters are primarily needed when transmitting
sound signals during a call.
Telephone book
Opening the telephone book
›
Press on the function key in the bottom right
order to open the phone book.
Select telephone number from the telephone book
›
When in the menu Telephone book move the sliding regulator in the scrollbar
to the bottom to view further stations.
›
Press on the function key
Search
mask.
›
Press in the left column on the display of a telephone book entry. The connec-
tion to the first call number stored for this entry in the telephone book, will now
be established.
Display information relating to a telephone book entry
›
Press the function key on the right next to the telephone book entry you

which to display. The call numbers stored under this entry are displayed.
›
If you press on the entry of a call number, the connection to this call number
will be established.
Search for an entry in the telephone book
›
Press on the function key
Search
phone book entry via a search mask.
14
Basic setting
with the lit-
0
0
have the same function as those on
#
in the main menu PHONE, in

to select a telephone book entry via a search
in the menu Telephone book to select a tele-
›
Press a selectable character on the keypad while in the search window to ac-
cept it in the entry line.
›
Press the function key
special characters. Press
›
You can delete the characters in the entry line starting from the position of the
character insertion cursor from left to right by pressing the function key
›
If you press on the button
and
+
lished, by doing so an assigned name is displayed in the entry line in the tele-
phone book.
The upper and lower case which is used when searching for a phone book entry,
is not of importance.
Editing field: Indicate specific characters
Ð Some letters are also marked with a small triangle "
characters based on this letter can be selected.
Continue to press down on the corresponding button with your finger until a pop-
up window with these specific characters fades in. Press to accept the desired
character into the entry line - the pop-up window will close. If no entries are en-
tered, the pop-up window will close automatically after a few seconds.
Adapt a call number
Open the display of a call number from the telephone book or a call list as descri-
bed in the corresponding chapter.
›
Press the arrow buttons
line.
›
Press on a character inserted into the keypad to accept it behind the character
entry cursor in the entry line.
›
The connection to the displayed call number will be established as soon as you
press the function key
Call lists
Ð
Only the dialed numbers which are missed, selected and accepted by the mobile
phone preparation program in the vehicle are stored. The call lists stored in a mo-
bile phone will not be transferred to the vehicle.
›
Press on the function key
to open the input screen for entering numbers and

, to change again to the letter input mask.
A-Z
, the connection to the first call number is estab-

". This indicates that specific

or to move the character entry cursor in the entry
 
.

in the main menu PHONE.
Call list
.

Ð
Ð
